Sakhanda Wire
NVDA $153.77 -1.52% MSFT $504.91 -2.53% GOOGL $281.52 -0.78% META $620.99 -0.87% AMZN $256.80 -0.37%
← Back to the news

Isaac Sim walkthrough demonstrates SimReady robot pick-and-place

A new walkthrough presents a beverage-can pick-and-place task in Isaac Sim using the UR17G arm, Robotiq 2F-140 gripper and a beverage can. The assets are assembled into one scene, validated, and controlled to grasp the can, lift it, move it to a target and release it. The example uses Isaac Sim 6.2 and an agent to generate task controls; GPT-6 Sol is used in the walkthrough, although other agent and model combinations may also work.

SimReady assets are OpenUSD packages prepared for a defined simulation use case. They can include properties such as collisions, mass, joints and joint drives. SimReady Central provides the models, simulation settings and validation evidence, while the user adds the scene layout and task code. The arm and gripper reports use the Robot-Body 4.0.0 and Robot-Gripper 3.0.0 profiles, respectively, and record passing PhysX driven-joint checks.

The article recommends checking joint limits, movement and contact behavior before running the task. Its results apply only to a fixed, scripted setup: vision, limited collision checks, can deformation and liquid motion are not modeled, and the grasp uses a 2 N·m drive-effort cap selected through simulation tests. The demonstration does not establish performance with uncertain object positions, different payloads or real hardware.

Written by Sakhanda Wire AI from reporting by Hugging Face. Facts, quotes and full context are in the original article below.

Originally published by Hugging Face on

Read the original on Hugging Face ↗

The reporting and the image belong to Hugging Face and are credited and linked above; the text on this page is Sakhanda Wire's own summary.

← Back to the news

More stories

All the latest news